JVC VN-V686UAPI Manual page 61

Getting Tilt Limit from VN-V686
Format /api/param?camera.motion.tilt.limit.upper
Example of response camera.motion.tilt.limit.upper=5&200 OK
Interpretation Acquire Tilt Limit in degrees.
Allowed users admin, operator, user
Setting Tilt Limit for VN-V686
Format /api/param?camera.motion.tilt.limit.upper=data
Example to set horizontal
Example of Response camera.motion.tilt.limit.upper&202
Accepted(camera.status=save)
Interpretation Set Tilt Limit. Specify from 0 to 15. 5 is horizontal. The change is saved by the API,
camera.status=save. If the change is not saved, the setting is restored by reboot.
Allowed users admin, operator
Getting Speed of Going to Preset Position from VN-V686
Format /api/param?camera.motion.position.speed
Example of response camera.motion.position.speed=100&200 OK
Interpretation Acquire speed of going to preset position. Value from 0 to 100 is returned. 100 is fastest. The speed
is 4 steps internally. The speed is applied also to preset position of auto patrol.
Allowed users admin, operator, user
Setting Speed of Going to Preset Position for VN-V686
Format /api/param?camera.motion.position.speed=data
Example to set horizontal
Example of Response camera.motion.position.speed&202
Accepted(camera.status=save)
Interpretation Set speed of going to preset position. Specify from 0 to 100. 5 is horizontal. 100 is fastest. The
speed is 4 steps internally. The speed is applied also to preset position of auto patrol. The change is saved by the API,
camera.status=save. If the change is not saved, the setting is restored by reboot.
Allowed users admin, operator
Getting Auto Flip Setting from VN-V686
Format /api/param?camera.motion.tilt.auto_flip
Example of response camera.motion.tilt.auto_flip=full_digital&200 OK
Interpretation Acquire setting of auto flip. off, full_digital, half, full or full_reverse is returned.
/api/param?camera.motion.tilt.limit.upper=5
/api/param?camera.motion.position.speed=100
61