Advertisement
Replacement
Instructions
for Page 6 of the Assembly
Manual
Use these instructions i nsteadof thoseon page 6 of yourgrillassemblymanual.
2 Remove
the remaining
parts from the Frame
Kit: 4 Side Supports
(11), 8
carriage bolts (DU), and 8 wing nuts (CP).
Locate 1 or 2 Sidetable(s)
(9), Control
Panel
(25), 2 Control
Knobs
(32), and Side
Burner
Kit, if needed, for assembly in this step.
1
2a-Insert
2 Side Supports
(11)
inside the Sidetable
(9) until the
tabs on the Sidetable
snap into the
notches,
Figure 1. If your grill is the
sideburner
model, assemble
the
side burner components
per the
instructions located in the
sideburner
kit.
IMPORTANT: M odel920.16201cannot
be convertedto a Sideburnerunit.
Attemptingsucha conversionwill void
the warranty!
2b-Loosely
attach
each Sidetable
or
Sideburner
a
;ombly to the leg
with 3 carriage
bolts (DU). Figure 2.
Do not secure
bolts with washers
and nuts at this time.
2
DU
2C-Place
the Back Brace (10) inside
the two back tegs and tighten
star
washers
(MR) and wing nuts (CP) onto
back leg carriage
bolts. Figure 3. Also,
tighten
washers
and wing nuts onto
front leg carriage
bolts.
11441014 (20303)
Advertisement
