Grounding Instructions - Windsor VP6 Operating Instructions Manual

THIS PRODUCT IS FOR COMMERCIAL
USE ONLY.
ELECTRICAL:
In the USA this machine operates on a
standard 15 amp 115V, 60 hz, A.C. power
circuit. The amp, hertz, and voltage are listed
on the data label found on each machine.
Using voltages above or below those
indicated on the data label will cause serious
damage to the motors.
EXTENSION CORDS:
A suitable extension cord is provided with this
appliance. The safe operation of the
appliance is dependent on the use of a
suitable extension cord. If a cord other than
the one provided is used, it must be type SJT,
at least 16 gauge, and limited to no more than
50 feet in length.

GROUNDING INSTRUCTIONS:

This appliance must be grounded. If it should
malfunction or break down, grounding
provides a path of least resistance for electric
current to reduce the risk of electric shock.
This appliance is equipped with a cord having
an equipment-grounding conductor and
grounding plug. The plug must be inserted
into an appropriate outlet that is properly
installed and grounded in accordance with all
local codes and ordinances.
This appliance is for use on a nominal 120-
volt circuit, and has a grounded plug that
looks like the plug in "Fig. A". A temporary
adaptor that looks like the adaptor in "Fig . C"
may be used to connect this plug to a 2-pole
receptacle as shown in "Fig. B", if a properly
grounded outlet is not available. The
temporary adaptor should be used only until a
properly grounded outlet (Fig. A) can be
installed by a qualified electrician. The green
colored rigid ear, lug, or the like extending
from the adaptor must be connected to a
permanent ground such as a properly
grounded outlet box cover. Whenever the
adaptor is used, it must be held in place by a
metal screw.
Grounded
Outlet
Adaptor
Improper connection of the equipment-
grounding conductor can result in a risk of
electric shock. Check with a qualified
electrician or service person if you are in
doubt as to whether the outlet is properly
grounded. Do not modify the plug
provided with the appliance - if it will not fit
the outlet, have a proper outlet installed by
a qualified electrician.
Le raccordement incorrect du conducteur de
terre d'équipement peut entraîner des risques
d'électrocution. Vérifiez auprès d'un électricien
qualifié ou d'un responsable de l'entretien si
vous avez quelque doute que ce soit quant au
raccordement à la terre de votre prise murale.
Ne modifiez pas la fiche fournie avec l'appareil
: si elle ne correspond pas à la prise murale,
faites installer une prise adéquate par un
électricien qualifié.
86038440 VACPAC 01/18/11
GROUNDING INSTRUCTIONS
Grounding Pin
GROUNDING CONNECTION
USING AN ADAPTOR
FIGURE A
Adaptor
Tab for Grounding
Grounded
Screw
Outlet Box
FIGURE C
Note: Adaptors are not allowed in Canada.
Metal Screw
FIGURE B
2-5