Installing The Compact Flash (Pf8T Only) - Intermec PF8D User Manual

Chapter 2 — Installing the Printer

Installing the Compact Flash (PF8t Only)

16
7 The status LED will cycle from red to green indicating that
the power is turned on.
The PF8t is supplied with 4MB flash memory and 8MB of
SDRAM memory. The built-in memory can be expanded by
using a compact flash card if more memory is required for your
application. You will need to purchase and install a compact flash
adapter to use a CF card.
You can select which memory source you want to use: built-in
memory or compact flash. Use Windows HyperTerminal to send
an ESim M command to the printer to select your memory
source. You can only use one memory source.
ESim memory allocation commands are:
M0 Select built-in memory
M1 Select compact flash memory
MF Format the compact flash card
For more information on ESim commands, refer to the ESim for
the PC4/PF8 Bar Code Label Printer Programmer's Reference
Manual (P/N 1-960629-xx).
Turn the printer power off when installing or removing the
compact flash card.
To install the compact flash card
1 Turn the PF8t power off.
2 Open the top cover by pressing the cover open buttons on
either side of the top cover.
3 Remove any media and the spindle.
4 Open and remove the compact flash card slot cover from the
printer base.
PF8d/PF8t Printers User's Guide