Thread Guide - Baby Lock BL50A Instruction And Reference Manual

GETTING READY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
i While holding the spool with your right hand,
and then pass the thread under the thread
guide.
1
a Thread guide
j Pass the thread under the thread guide cover
from the back to the front.
Hold the thread with your right hand so that
there is no slack in the thread that is pulled
out, and then pass the thread under the thread
guide cover with your left hand.
a Thread guide cover
k Thread the machine by guiding the thread
along the path indicated by the number on the
machine.
22
l
m
a
n
Slide the thread into the thread take-up lever
from the right to the left.
a
a Thread take-up lever
Memo
● If the needle is not raised, the thread take-
up lever cannot be threaded. Be sure to
press the needle position button to raise the
needle before threading the thread take-up
lever.
Pass the thread behind the needle bar thread
guide.
The thread can easily be passed behind the
needle bar thread guide by holding the thread
in your left hand, and pulling the thread into
the guide from right to left.
a
a Needle bar thread guide
Lower the presser foot lever.
a
a Presser foot lever