Baby Lock BL50A Instruction And Reference Manual page 40

GETTING READY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
c Install the extension table.
Keeping the extension table level, fully slide it
into place. The lower right corner section of
the extension table extends over the front
section of the sewing machine bed.
a Lower right corner
b Sewing machine bed
Note
● The optional extension table is available
through your Baby Lock retailer.
Turn the screw at the bottom of each leg to
d
adjust their height so the extension table will
be level with the sewing machine bed.
CAUTION
● Do not move the sewing machine while the
extension table is attached, otherwise damage
or injuries may occur.
e When you are finished using the extension
table, remove it.
While slightly lifting up the extension table,
pull it off to the left.
38
2
1
f Install the flat bed attachment back in its
original position.