Edit A Number/Name Stored In The Directory - VTech gz2436 User Manual

Telephone Directory
8. Press SELECT or PROG to confirm your selection. If you chose Y, the screen displays:
NOTE: If you chose N, skip to Step 10.
9. The ringer name will blink. Press
SELECT or PROG to confirm. The screen displays:
10. Press or to change the setting. Choose Y (for yes) if you wish the phone to show
an animation when the incoming call matches this number. Choose N (for no animation).
Your choices of animation are:
11. Press SELECT or PROG to confirm your selection. If you chose Y, the screen will
display one of the two animations. Press
SELECT or PROG to confirm. You'll hear a confirmation beep. When you select Y in step
7, a will be displayed with the directory entry.
NOTE: When memory is full the screen displays MEMORY FULL, an error tone sounds,
and you will not be able to store a new number until you delete a stored number.

Edit a Number/Name Stored in the Directory

1. Press ( ). The screen displays DIRECTORY.
2. Press or to scroll alphabetically through the entries.
-OR-
Press the dial pad key for the first letter of the entry you want to edit.
3. When the screen displays the entry you want to edit, press SELECT. Then press
until EDIT flashes.
4. Press SELECT. The screen displays the name and number. The cursor appears at the
end of the name. Use
move on to edit the number. Use
SELECT to move on to edit the Distinctive Ring and Animation settings. Follow steps
7 through 11 in Store a Number/Name in the Directory.
or to choose the desired ring tone. Then press
alternately
alternately
, and the dial pad keys to edit the name. Press SELECT to
to backspace and make corrections. Press
14
or to change the setting, then press