Pc Protocol Setup - Kodak NOVAJET 750 Training Manual

NOTE: Before you can configure a Windows print queue, you must first configure an IP
address on both your PC and the SEH print server.

1. PC PROTOCOL SETUP

1. If you have not already done so, install the TCP/IP protocol on your PC. This is done
by first RIGHT-CLICKING on the My Network Places icon on your desktop. Select
Properties from the list. The Network dialog box appears.
2. Double click on the Local Area Connection icon. When the Local Area Connection
dialog box opens, double click on the TCP/IP protocol to activate the TCP/IP
properties. See figure below.
3. Once the TCP/IP properties dialog box is open enter the information as follows:
IP Address- 192.168.254.201
SUBNET Mask- 255.255.255.0
DNS Server- 192.168.254.195
NJ750 Training Guide
26