LG WD-803(4)0(W)(F)(H) Service Manual page 45

PULLEY, MOTOR, DAMPER
Hinge,
Damper
(PULLEY)
1
2
3
(MOTOR)
Damper
(DAMPER)
The back cover is removed.
The belt is pulled off while turning over the pulley.
The bolt is unscrewed to the shaft and then
the pulley pulled off.
Two screws are unscrewed from the bracket (Motor).
The motor is pushed to arrow direction and then
it is disassembled.
(When mounting the bushing should be fit the
bracket holder <Motor>)
Lay the washing machine.
The hinge (Damper) at the tub is pulled off
pressing on the snaps at the sharp end.
The hinge at the base is pulled off.
44