10. DISASSEMBLY INSTRUCTIONS
Disassemble and repair the parts after pulling out power cord from the outlet
PANEL ASSEMBLY (CONTROL)
The PWB assembly (Display) connectors are
Pull out drawer, three screws are unscrewed.
PLATE ASSEMBLY (TOP)
Two screws are unscrewed on the top plate.
The plate assembly (Top) is pulled back and then
upward to arrow direction.
Push two upper hooks and pull the control panel
The PWB assembly (Display) is disconnected.
When 9 screws are unscrewed on the PWB
insulator and the PWB assembly (Display) is
disassembled from the PWB insulator.