LG WD-803(4)0(W)(F)(H) Service Manual page 37

I WD-1223(5)F(H)(B)/WD-1243(5)F(H)(B) / WD-1041(3)F(H)B / WD-102(4)1(5)F(H)B / WD-803(4)0F(H)B
(1)
I WD-803(4)0(W)(F)(H)/WD-102(4)1(5)W(F)(H)/WD-1042F(H)
1
HEATING CONTINUOUSLY ABOVE
THE SETTING WATER TEMPERATURE
When disconnect the connector(1) on the
PWB assembly (Main) is the resistance of the
natural connectors
(Blue, White) between 2.5k
(105 ~0 )?
YES
When checking thermistor on the tub cover,
is the thermistor loosened above 2mm from
the rubber?
Is the resistance between two receptacles with
BL/WH wires parted from PWB assembly
2.5k to 180k (105 ~0 )?
YES
When checking thermistor on the tub cover,
is the thermistor gotten more than 2 mm out of the
rubber?
( Blue/White, Violet),
to 180k
2 1
4 3
36
Replace the thermistor.
NO
(6322FR2046B)
Press the thermistor
YES
tightly to the rubber.
Replace the thermistor.
(6322FR2046B)
NO
Get the thermistor back
YES to the rubber.