I WD-1223(5)F(H)(B)/WD-1243(5)F(H)(B) / WD-1041(3)F(H)B / WD-102(4)1(5)F(H)B / WD-803(4)0F(H)B
Check on the spinning, is the frequency of the
water level 248 or more. The frequency can be
checked by pressing the WASH
) buttons at the same time on the
When pressing RINSE (
buttons at the same time after power
off, press the START/PAUSE (
is the drum spinning at low speed?
Is it disconnected, or disassembled?
Red:3-pin ( )
Check the motor connector. Is the resistance of
the terminal same as the figure?
Resistance of terminal:
Replace the PWB assembly (Main).
) button 2 times,
Check the sensor
(Pressure) or hose
If the problem is on the
sensor or the hose, replace
the sensor or the hose.
Correct the connector.
Replace the motor