LG WD-803(4)0(W)(F)(H) Service Manual page 13

I WD-1021(5)W(F)(H)/WD-1041(5)W(F)(H)
Rinse hold
• Rinse hold function can be selected by pressing the rinse
button, and rinse hold lamp turns ON.
• Selection rinse hold washer waits without drain / spinning after
rinse.
• To drain and spin, press rinse button, rinse hold lamp
turns off and drain / spinning starts.
For manual wash,
rinse, and spin
• Use these buttons to change
washing method, rinse
method spinning speed.
• When lamp is off, no selection
has been made.
• Prewashing is available for
coloreds, whites, and
synthetic program.
How to select water temperature
• Press the button to select water temperature.
• The water temperature can be selected [40°C
60°C Cold ] during coloreds, or synthetic
programs.
• 95°C is selected only for whites program.
• By pressing the button while operating the
present temperature is displayed.
Displaying abnormal operation
• Display the remaining time (Hour : Minute)
• The remaining time is reduced by
the washing cycle.
• Error lamp is indicated the abnormal operation.
(
• Display the reservation time.
Wash
How to set the Function
How to use delayed washing
• Press the button when reservation washing is needed.
• When the button is pressed,
A maximum delay of
• Whenever pressing it, one hour increases.
• Use the power button to cancel it.
• Time delay means the time required from the present
to the completion of washing.
12
)
, ,
Rinse Spin
is displayed.
hours can be set.
Water T
Temp. De