Test Operation - LG WD-803(4)0(W)(F)(H) Service Manual

TEST OPERATION

Preparation for
washing.
Connect the power plug to
the outlet.
Connect the inlet hose.
Check the water heating.
Press the button (WATER TEMP)
( ) and then the
present temperature in
displayed.
Check the drain and spin
Pre
Rinse hold
Super
Main
Normal
(Wash) (Rinse)
Troubleshooting refer to (8-4.ERROR DISPLAY)
Assemble and disassemble refer to (10.Disassembly Instructions)
Press the
POWER (
button.
In case of coloreds
program.
Check automatic reverse
turn.
Check if the drum rotates to
clockwise and counterclockwise.
Power off
1200
1000
800
600
no Spin
After power off, press the
DOOR OPEN (
(Spin)
check the door open.
Press the
) PROGRAM (
button.
P
In case of coloreds
program.
) button to
9
Press the
) (START/PAUSE)
P
( ) button.
Check the water supply.
Check shower because the
water supplied on the door
at first.
Water removal
If SVC is needed, during
check and remove
the remaining water by pulling
out the hose cap.