Download  Print this page

LG F1056QD Series Owner's Manual

Hide thumbs


Washing Machine

Thank you for buying a
LG Fully Automatic Washing machine.
Please read your owner's manual carefully, it provides
instructions on safe installation, use and maintenance.
Retain it for future reference.
Record the model and serial numbers of your washing machine.



  Also See for LG F1056QD Series

  Related Manuals for LG F1056QD Series

  Summary of Contents for LG F1056QD Series

  • Page 1: Washing Machine

    F1056QD(1~9) F1256QD(1~9) F1456QD(1~9) Thank you for buying a LG Fully Automatic Washing machine. Please read your owner’s manual carefully, it provides instructions on safe installation, use and maintenance. Retain it for future reference. Record the model and serial numbers of your washing machine.
  • Page 2: Table Of Contents

    roduct Features Protection against creases With the alternate rotation of the drum, creasing in the laundry is uilt-in heater Internal heater automatically heats the water to the best temperature on selected cycles. More economical by Intelligent Wash System Intelligent Wash System detects the amount of load and water temperature, and then determines the optimum water level and washing time to minimize energy and water consumption.
  • Page 3: Warnings

    arnings READ ALL INSTRUCTIONS AND EXPLANATION OF THE INSTALLATION BEFORE USE For your safety, the information in this manual must be followed to minimize WARNING! the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life. IMPORTANT SAFETY INSTRUCTIONS WARNING To reduce the risk of fire, electric shock, or injury to persons when using...
  • Page 4: Specifications

    pecifications ■ Name : Front loading washing machine ■ Power supply : 220-240V~,50Hz ■ Size : 600mm(W) 550mm(D) 850mm(H) ■ Weight/Max.Watt : 61kg / 2100W ■ Wash capacity : Refer to the Rating Label ■ Water consumption : 49 (7 /kg) ■...
  • Page 5: Installation

    nstallation Install or store where it will not be exposed to temperatures below freezing or exposed to the weather. Properly ground washer to conform with all governing codes and ordinances. The base opening must not be obstructed by carpeting when the washing machine is installed on a carpeted floor.
  • Page 6: Installation Place Requirement

    nstallation Installation place requirement Level floor : Drain Hose Allowable slope under entire washer is 1˚ Washer Power outlet : Must be within 1.5 meters of either side of location of washer. Do not overload the outlet with more than one appliance.
  • Page 7: Electrical Connection

    nstallation ■ Electrical connection 1. Do not use an extension cord or double adapter. 2. If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or similarly qualified person in order to avoid a hazard. 3.
  • Page 8: Normal Tap Without Thread & Screw Type Inlet Hose

    nstallation Normal Tap without thread & screw type inlet hose Unscrew the fixing screw to Push the connector up till the Push the water supply hose attach the tap. rubber packing is in tight contact vertically upwards so that the with the tap.
  • Page 9: Installation Of Drain Hose

    nstallation This equipment is not designed for maritime use or for use mobile installations such as caravans, aircraft etc. Turn off the stopcock if the machine is to be left for any length of time (e.g. holiday), especially if there is no floor drain(gully) in the immediate vicinity. When disposing of the appliance, cut off the mains cable, and destroy the plug Disable the door lock to prevent young children being trapped inside.
  • Page 10: Level Adjustment

    • If possible install the washer in one of the corners of the room, where the floor is more stable. Insert the rubber cups to reduce vibration. You can obtain the rubber cups (p/no.4620ER4002B) from the LG spares dept. Important! •...
  • Page 11: Care Before Washing

    are before washing Before the first washing Select a cycle (COTTON 60°C, add a half load of detergent) allow the unit to wash without clothing. This will remove residues and water from the drum that may have been left during manufacturing. Caring before washing 1.
  • Page 12: Adding Detergent

    dding detergent Adding detergent and fabric softener 1. The Dispenser Drawer • Main wash only ➔ • Pre Wash + Main Wash ➔ 2. Adding Fabric Softener • Do not exceed the maximum fill line. Close the dispenser drawer slowly. Overfilling can cause early dispensing of the fabric softener which could stain clothes.
  • Page 13: Detergent Dosage

    dding detergent ❋ Tips 3. Detergent dosage Full load : according to • The detergent should be used according to the manufacturer’s recommendation. instruction of the detergent manufacture. Part load : 3/4 of the normal amount. • If too much detergent is used, too many suds Minimum load : 1/2 of full load.
  • Page 14: Function

    unction Recommended courses according to the laundry type Fabric Type Proper Temp. Program Option Maximum Load Color fast gaments (shirts, night 60˚C Medic Rinse Cotton dresses, pajamas...) and lightly (Cold, 30˚C, Rating Intensive soiled white cotton(underwear...) 40°C,95°C) Pre Wash 40˚C Crease Care Less than Polyamide, Acryic, Polyester...
  • Page 15: How To Use Washer

    ow to use washer 2. Manual Selecting 1. Cotton automatically selected upon power on. • Press the Power button to start. • Select the conditions which you want to use, • Press the Power button to start. by turning the program dial and pressing •...
  • Page 16: Power/Program

    ow to use washer (1) Dial : Program (5) Button : Power (9) Button : Crease Care (2) Button : Start / Pause (6) Button : Medic Rinse (10) Child Lock (3) Button : Spin (7) Button : Pre Wash (11) Button : Time Delay (4) Button : Temperature (8) Button : Intensive...
  • Page 17: Medic Rinse

    ow to use washer Start/Pause Option • By pressing the Option button, all Option functions 1. Start may be selected. • This Start/Pause button is used to start wash cycle or pause the wash cycle. 2. Pause • If temporary stop of wash cycle is 1.
  • Page 18: Child Lock

    ow to use washer Child Lock If you choose to lock the buttons on the control • To change to the desired program, whilst in assembly to prevent tampering this function child lock mode. may be selected. 1. Press both Medic Rinse and Pre Wash together once again.
  • Page 19: Rinse Hold

    ow to use washer Spin • After selecting the spin course, the spin speed can be chosen by pressing the spin button. [F1256QD(1~9)] [F1456QD(1~9)] [F1056QD(1~9)] 1. Spin selection 2. No spin • Spin Speed is available according to • If No spin is selected, the washer stops the program as follows.
  • Page 20: Time Delay

    ow to use washer Water Temp. Time Delay • By pressing the Temp. button, the water temperature can be selected. - Cold Preparing washing before starting - 30˚C / 40˚C / 60˚C / 95˚C “Time Delay” - Turn on the water tap. - Load laundry and close the door.
  • Page 21: Display

    ow to use washer Display 3. Completion of washing • When washing cycle is completed, “ ” is displayed on the “Multi display”. 4. Time left 1. Special function display • During washing cycle, the remaining washing • When child lock is selected, the time is displayed.
  • Page 22: Maintenance

    aintenance ❋ Before cleaning the washer interior, unplug the electrical power cord to avoid electrical shock to avoid electrical shock hazards. ❋ When disposing of the appliance, cut off the mains cable, and destroy the plug Disable the door lock to prevent young children being trapped inside. The water inlet filter - "...
  • Page 23 aintenance The drain pump filter ❋ The drain filter collects threads and small objects left in the laundry. Check regularly that the filter is clean to ensure smooth running of your machine. CAUTION First drain using the drain hose and then open the pump filter to remove whatever any threads or objects.
  • Page 24: Dispenser Drawer

    aintenance ■ Dispenser drawer ❋ After a while detergents and fabric softeners leave a deposit in the drawer. • It should be cleaned from time to time with a jet of running water. • If necessary it can be removed completely from the machine by pressing the catch downwards and by pulling it out.
  • Page 25: Cleaning Your Washer

    aintenance ■ Cleaning your washer 1. Exterior Proper care of your washer can extend its life. The outside of the machine can be cleaned with warm water and a neutral non abrasive household detergent. Immediately wipe off any spills. Wipe with damp cloth. Try not to hit surface with sharp objects.
  • Page 26: Troubleshooting Guide

    roubleshooting guide ❋ This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately When the machine does not function properly or does not function at all, check the following points before you contact your service provider.
  • Page 27 roubleshooting guide Symptom Possible Cause Solution Washer does not start • Electrical power cord may not Make sure plug fits tightly in wall be plugged in or connection outlet. may be loose. • House fuse blown, circuit Reset circuit breaker or replace fuse. breaker tripped,or a power Do not increase fuse capacity.
  • Page 28 roubleshooting guide Symptom Possible Cause Solution Check another tap in the house. • Water supply is not adequate in area. Fully open tap. • Water supply taps are not completely open. Straighten hose(s). • Water inlet hose(s) are kinked. Check the filter of the inlet hose. •...
  • Page 29: Terms Of Warranty

    erms of Warranty Disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.
  • Page 32 For U.K. Customer CUSTOMER SERVICES Tel. : +44-(0) 844 847 LGLG(5454) Fax. : +44-(0) 844 847 1413 LGEUK SERVICE WEB-SITE : P/No.: MFL61988408...