Logging On; Logging Off; Incoming Calls; Answering Calls - Aastra DT390 User Manual

5.1

Logging on

To log on, do the following:
1. Press *11*.
2. Enter the Authorization Code and press *.
3. Enter your extension number, press # and then
4. Press
5.2

Logging off

To log off, do the following:
1. Press #11# and press
2. Press
6

Incoming Calls

A flashing indicator, accompanied by a ring signal and a vibrating handset,
indicates an incoming call. The ring type can tell if the call is an internal,
external or callback call. Both ring signal and vibrator can be disabled. The
calling party's number, name, or both, is displayed. The name of the caller
will be shown if the calling party's phone number is stored in any of the
phonebooks. When a headset is connected to the handset, the answering
button on the headset can be used to answer the call.
The 25 last received phone numbers are stored in the call list, together with
the latest dialled and missed phone numbers, see Section 7.1.
6.1

Answering Calls

When receiving a call, do the following to answer:
6. Press .
OR
7. Press to answer in loudspeaking mode (handsfree).
You are connected to the caller via the loudspeaker.
OR
1424_EN_LZT103087.doc Rev B2 2009-09-11
Wait for the call timer to start in the display.
to finish the procedure.
The display shows your phone number.
Wait for the call timer to start in the display.
to finish the procedure.
.
© Copyright Aastra Telecom Sweden, 2009.
All rights reserved.
.
32