Intel U3-1L Quick Start Manual page 11

d. Windows 2000: Complete the remainder of the Windows 2000
installation and then proceed to Step 3.
Windows NT 4.0: After completing the NT installation, install the
following components and software:
Microsoft Windows NT 4.0 Service Pack 4 or greater
Microsoft Internet Explorer 4.00 or greater
3
Install the RAID Software Suite
NOTE
The system should be powered on and logged into Windows with an
administrator's account before proceeding.
a. Insert the Intel Server RAID Controller U3-1L Low Profile CD-ROM
in the CD-ROM drive. The setup splash screen appears (If the setup
splash screen does not appear, then run the appropriate setup.exe file:
Windows 2000: <CD-ROM root>\os_setup\win2k\setup.exe
Windows NT 4.0: <CD-ROM root>\os_setup\winnt\setup.exe)
Intel Integrated RAID Setup Splash Screen
b. Click on the Setup button. See the figure above. The RAID Software
Suite setup program starts.
c. Complete the installation using the default selections
Windows 2000 (only): A "Digital Signature Not Found" message
box may pop up during the installation. If this occurs, click "Yes" to
continue the installation.
Intel Server RAID Controller U3-1L (SRCU31L)
Quick Start Guide
11