Intel U3-1L Quick Start Manual page 10

Installing Microsoft Windows 2000 or Windows NT 4.0 on an Intel
Integrated RAID Volume
1
Create a SRCU31L Microsoft Windows 2000 or Windows NT Installation
Driver (temporary) Diskette
a. Insert the SRCU31L Software CD-ROM into the target system and
restart the system to boot from the CD-ROM.
b. When the ROM-DOS Startup Menu appears select option #1,
Make Diskettes.
c. When the Select a diskette to create screen appears, select
Windows NT Installation for Windows NT 4.0 or Windows 2000
Installation for Windows 2000. A command window appears.
d. Insert a blank high-density diskette in drive A: and press Enter to
create the Windows Installation Driver Diskette.
2
Install Microsoft Windows 2000 or Windows NT 4.0
a. Boot with the Windows 2000 or Windows NT 4.0 CD-ROM.
b. Press F6 as soon as the first blue screen appears to ensure that
Windows Setup bypasses mass storage controller detection.
c. When prompted to specify a mass storage controller:
Select S to specify additional storage devices.
Insert the appropriate SRCU31L Microsoft Windows Installation
Driver Diskette (created in Step 1 above) in the floppy drive and
press Enter.
Press Enter to select the Installation Driver and continue with
Windows installation (see example for Windows 2000 below).
Windows 2000 Setup Screen Example
10 Intel Server RAID Controller U3-1L (SRCU31L)
Quick Start Guide