Convection Oven Motor Assembly - Garland MCO-GD-10M Service Manual

Assembly
7
1. Assemble motor mount plate,
fastening four flat head m.s. 1/4-20x2½"
2. Secure each flat head m.s. 1/4-20x2½"
3. Attach motor mounting plate to motor
the mounting tabs on motor
4. Insert shaft of motor
¼" away from the inner motor mounting plate
5. Secure the blower wheel
on the blower wheel hub. Use a torque wrench and tighten to 180 inch pounds for proper
securing.
***** For warranty replacement we require that you use the motor assembly. Order motor
assembly part # CK1003090 - 2 Speed, 115 Vac, or CK1003091 2 Speed, 208/240 Vac (Export
or Special), CK1003092 - 1 Speed, 115,208,240 Vac.
6
5
FILE NAME
JIT00012
* insulation,
as shown. Secure with two hex nuts 1/4-20
through the hub of the blower wheel
to the shaft of the motor
2
1
4
motor mount plate inner together by
into the four holes noted on the above drawings.
with a flat washer
. Insert the four flat head m.s. 1/4-20x2½"
.
by tightening the two set screws
23
3
5
8
and three hex nuts 1/4-20
.
. Space the blower wheel
9
.
through