Disassembly Of The Right Door (W/O Window) - Garland MCO-GD-10M Service Manual

6
7
To disassemble left door:
1. Once the door has been removed from the oven (refer to instructions on the previous page),
remove the 12 truss head 10 x ½ Phillips screws
2. Remove 2 allen head cap screws from the door handle
3. Carefully pry off the door panel
4. Remove 2 hex head m.s. ¼ -20 x ½ from the door liner
the door liner .
5. Lift out the door frame
6. Carefully pry off the door window
7. To remove door catch
8. To reassemble - reverse above procedure.
NOTE: There is a seam one side of the bezel that is part of the door window
working from the opposite side that the seam is on and work around the window
towards that seam.

Disassembly of the Right Door (w/o window)

3
1
7
from the door window bezel
.
for door liner
remove 2 pan head Phillips screws.
20
NOTICE: DEPENDENT DOOR SHOWN
8
2
7
.
.
that attach hold down straps
.
4
5
.
, reinstall
to