Cisco uBR10012 Software Configuration Manual page 75

Chapter 1 Overview of Cisco uBR10012 Universal Broadband Router Software
Syntax Description mac-address
ip-address
udp-port
For additional command information, refer to the
on Cisco.com.
PXF ARP Filter
Cisco IOS Release 12.3(17a)BC introduces PXF ARP Filter feature. The ARP filter now has a PXF
component that filters ARP packets for identified "ARP offenders", thereby decreasing ARP punt rate
and RP CPU usage.
For additional information, refer to the following document on Cisco.com
•
PXF Divert Rate Limiting
Cisco IOS Release 12.3(17a)BC introduces PXF Divert Rate Limiting feature. Rate-limiting on the
divert path causes packets that will cause congestion to toRP queues to be dropped, before any packets
have been queued, so valid packets are unaffected.
For additional information, refer to the following document on Cisco.com
•
OL-1520-05
Specifies the MAC address.
Specifies the IP address for the destination data collector.
Specifies the destination UDP port number for the intercept stream at the
data collector. Valid range is 0 to 65535.
Cable ARP Filtering
http://www.cisco.com/en/US/docs/cable/cmts/feature/cblarpfl.html
Cable ARP Filtering
http://www.cisco.com/en/US/docs/cable/cmts/feature/cblarpfl.html
Supported Software Features for the Cisco uBR10012 Router
Cisco CMTS IOS Cable Command Reference Guide
Cisco uBR10012 Universal Broadband Router Software Configuration Guide
1-55