Cisco uBR10012 Software Configuration Manual page 204

show cable qos profile
show cable qos profile
To display quality-of-service (QoS) profiles for a Cisco CMTS, use the show cable qos profile
command in privileged EXEC mode.
show cable qos profile profile-index [verbose]
Commencing with Cisco IOS Release 12.0(7)XR, the verbose option was added. Commencing with
Note
Cisco IOS Release 12.1(4)CX, this command was deprecated for DOCSIS 1.1 use because DOCSIS
1.1 replaces the QoS profile model with a service flow model. The show interface cable qos
paramset command is used for DOCSIS 1.1 operation.
Syntax Description
profile-index
verbose
Examples The following example displays the QoS tables for profiles 1, 2, 3, and 4:
Router# show cable qos profile
Service Prio Max
class
1
2
3
4
The following example displays verbose output for profile 1:
Router# show cable qos profile verbose
hccp-server# show cable qos profile verbose
Profile Index
Name
Upstream Traffic Priority
Upstream Maximum Rate (bps)
Upstream Guaranteed Rate (bps)
Unsolicited Grant Size (bytes)
Unsolicited Grant Interval (usecs)
Upstream Maximum Transmit Burst (bytes) 0
IP Type of Service Overwrite Mask
IP Type of Service Overwrite Value
Downstream Maximum Rate (bps)
Created By
Baseline Privacy Enabled
For additional information, examples, command history and related commands, refer to the
Cisco Broadband Cable Command Reference Guide
Cisco uBR10012 Universal Broadband Router Software Configuration Guide
6-8
Displays cable QoS table. Valid range is 1 to 255.
Displays detail information about the quality-of-service profiles.
Guarantee Max
upstream upstream
bandwidth bandwidth bandwidth
0 0 0
0 64000 0
0 1000 0
7 2000000 100000
Max tx TOS
downstream burst mask value by
0 0 0x0
1000000 0 0x0
1000 0 0x0
4000000 0 0x0
1
Default
0
0
0
0
0
0x0
0x0
0
cmts(r)
no
on Cisco.com.
Chapter 6 Troubleshooting the System
TOS Create B
priv
enab
0x0 cmts no
0x0 cmts no
0x0 cmts no
0x0 cm yes
OL-1520-05