Packetcable And Voice Support Features; Subscriber Traffic Management (Stm) Version; Usage Based Billing (Samis) - Cisco uBR10012 Software Configuration Manual

Universal broadband router
Hide thumbs Also See for uBR10012:
Table of Contents

Advertisement

Supported Software Features for the Cisco uBR10012 Router

Subscriber Traffic Management (STM) Version 1.1

Cisco IOS Release 12.3(9a)BC introduces support for Subscriber Traffic Management (STM) through
Version 1.1 on the Cisco uBR10012 universal broadband router. STM 1.1 supports DOCSIS
1.1-compliant cable modems.
The STM feature enables service providers to identify and control subscribers who exceed the maximum
bandwidth allowed under their registered quality of service (QoS) profiles. STM 1.1 works with
Network-Based Application Recognition (NBAR) and Access control lists (ACLs) to ensure full
network performance to other network subscribers that abide by their service agreements. STM 1.1 also
works in conjunction with the Cisco Broadband Troubleshooter 3.2 to support additional network
management and troubleshooting functions in the Cisco CMTS.
STM 1.1 extends earlier STM functions to monitor a subscriber's traffic on DOCSIS 1.1 primary service
flows and supports these additional features:
For additional information about STM 1.1 and Cisco CBT 3.2, refer to the following document on
Cisco.com:

Usage Based Billing (SAMIS)

Cisco IOS Release 12.3(9a)BC introduces the Usage-Based Billing feature on the Cisco uBR10012
router, supporting DOCSIS 1.0- and DOCSIS 1.1-compliant cable modems. This feature provides
subscriber account and billing information in the Subscriber Account Management Interface
Specification (SAMIS) format. SAMIS is specified by the Data-over-Cable Service Interface
Specifications (DOCSIS) Operations Support System Interface (OSSI) specification.
The
support of SAMIS.
For additional information about configuring and monitoring Usage-Based Billing (SAMIS) on the
Cisco uBR10012 CMTS, refer to the following document on Cisco.com:

PacketCable and Voice Support Features

The Cisco uBR10012 router supports the following PacketCable and PacketCable MultiMedia features:
Cisco uBR10012 Universal Broadband Router Software Configuration Guide
1-80
Cisco Broadband Troubleshooter (CBT) 3.2 supports STM 1.1.
DOCSIS 1.0-compliant and DOCSIS 1.1-compliant cable modem are supported.
Monitoring and application of traffic management policies are applied on a service-flow basis.
Monitoring window duration increased from seven to 30 days.
Subscriber Traffic Management for the Cisco CMTS
http://www.cisco.com/en/US/docs/cable/cmts/feature/ubsubmon.html
Release Notes for Cisco Broadband Troubleshooter Release 3.2
http://www.cisco.com/en/US/products/sw/netmgtsw/ps819/prod_release_notes_list.html
CISCO-CABLE-METERING-MIB
Usage Based Billing for the Cisco CMTS
http://www.cisco.com/en/US/docs/cable/cmts/feature/ubrsamis.html
PacketCable 1.0 With CALEA
PacketCable Emergency 911 Cable Interface Line Card Prioritization
PacketCable Emergency 911 Services Listing and History
Chapter 1
Overview of Cisco uBR10012 Universal Broadband Router Software
is also introduced with Cisco IOS Release 12.3(9a)BC in
OL-1520-05

Advertisement

Table of Contents
loading

Table of Contents