Additional References - Cisco uBR10012 Software Configuration Manual

Additional References

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Additional References
The following references provide additional information related to the Cisco uBR10012 router.
Related Topic
Documentation Roadmap
Cisco uBR10012 Hardware
Installation
Cisco uBR10012 Field
Replaceable Units (FRUs)
Cisco uBR10012 Universal Broadband Router Software Configuration Guide
14
RP—route processor
RPR(+)—Route Processor Redundancy (plus)
RTS—Request To Send
SA—spectrum analyzer
SDRAM—synchronous dynamic random-access memory
SFID—Service Flow Identifier
SID—Service ID
SIMM—single in-line memory module
SM—subscriber modem or spectrum manager
SMI—single-mode intermediate reach
SNMP—Simple Network Management Protocol
TCP/IP—Transmission Control Protocol/Internet Protocol
TDM—time-division multiplexing
TFTP—Trivial File Transfer Protocol
ToD—time-of-day
ToS—Type of Service
UBR—unspecified bit rate
UDP—User Datagram Protocol
UNI—User-Network Interface
US—upstream—Data flowing from the cable network towards the internet backbone is considered
to be moving in the upstream direction. Also, data flowing from the CM towards the CMTS is
moving in the upstream direction.
UTP—unshielded twisted-pair
VC—virtual circuit
VPN—Virtual Private Network
Document Title
Cisco uBR7200 Series Routers and Cisco uBR10012 Universal Broadband Router
•
Documentation Roadmap
http://www.cisco.com/en/US/docs/cable/cmts/ubr10012/roadmap/u10krdmp.html
Cisco uBR10012 Universal Broadband Router Hardware Installation Guide
•
http://www.cisco.com/en/US/docs/cable/cmts/ubr10012/installation/guide/hig.html
Cisco uBR10012 Field Replaceable Units (FRUs) Documentation Web Page
•
http://www.pluscom.ru/cisco_product/cc/td/doc/product/cable/ubr10k/ubr10012/frus/index.h
tm
Preface
OL-1520-06