Drive - Maxtor SATA/300 PCI CARD Installation Manual

MAXTOR SATA/300 PCI CARD INSTALLATION GUIDE
Connect Hard Drive
The SATA/300 PCI Card has two SATA/300 ports that each support one Serial ATA drive and one parallel Ultra ATA/133
port that supports two Ultra ATA/IDE hard drives. The card does not support ATAPI devices such as Zip drives or CD/
DVD drives. Before connecting a hard drive to the card, mount the drive in your system using the instructions provided
with the drive or your system manual.
If you have an existing installation of Windows 2000 or XP on a drive that you wish to connect to the SATA/300 PCI card, DO NOT
connect the drive to the card yet. Leave the drive attached to its current controller. You must install the Windows driver for the
SATA/300 PCI Card before connecting your hard drive to the card. See Install Windows Driver on page 10 for details.
LED Ultra ATA
Connectors Port 3
FIGURE 5
AVAILABLE PORTS
Serial ATA
Port 2
Serial ATA
Port 1
ENGLISH - PAGE 5