Maxtor SATA/300 PCI CARD Installation Manual page 14

MAXTOR SATA/300 PCI CARD INSTALLATION GUIDE
9. When the wizard has finished installing the driver, remove any floppies or CDs then click Finish to restart your system.
10. After Windows has restarted, perform a regular shutdown. Connect the interface and power cables to any hard
drives you wish to attach to the card, then restart your system.
Upon restart with the new drive connected, Windows should notify you that it has found a new storage device and asks if you
would like to proceed with the format to use the drive in the system. Proceed with Windows format as necessary.
ENGLISH - PAGE 11