Ec-Declaration Of Conformity - Husqvarna 535RJ Operator's Manual

Approved accessories
Centre hole in blades/cutters, Ø 25,4
mm
Output shaft thread M12
Grass blade/grass cutter
Plastic blades
Trimmer head
Support cup
EC-declaration of conformity (Applies to Europe only)
We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare that the brush cutters Husqvarna
535RJ with serial numbers dating from 2010 onwards (the year is clearly stated on the rating plate, followed by the
serial number), comply with the requirements of the COUNCIL'S DIRECTIVE:
- of May 17, 2006 "relating to machinery" 2006/42/EC
- of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC. Conformity assessment according
to Annex V. For information relating to noise emissions, see the chapter Technical data.
The following standards have been applied: EN292-2:1992, CISPR 12:2005, EN ISO 11806:1997
SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has performed voluntary type
examination on behalf of Husqvarna AB. The certificates are numbered: SEC/09/2165, 01/164/055 - 535RJ
Huskvarna December 1, 2010
Bo Jonsson, Development manager (Authorized representative for Husqvarna AB and responsible for technical
documentation.)
Type
Multi 255-3 (Ø 255 3 teeth)
Grass 255-4 (Ø 255 4 teeth)
Multi 275-4 (Ø 275 4 teeth)
Tricut Ø 300 mm (Separate blades
have part number 531 01 77-15)
T35, T35x (Ø 2.4 - 3.0 mm cord)
S35 (Ø 2.4 - 3.0 mm cord)
T45x (Ø 2.7 - 3.3 mm cord)
503 89 01-02
Cutting attachment guard, Art. no.
537 33 16-03
537 33 16-03
537 33 16-03
537 33 16-03
537 33 16-03 / 537 34 94-03
537 33 16-03 / 537 34 94-03
537 33 16-03 / 537 34 94-03
-