Prompt Enter Entry; Number - Motorola 68230 - Vanguard 300 DSU/CSU Operator's Manual

From the Configure menu, select Configure Network
9
Services -> Mnemonic Table. Then configure the
following
Prompt
Entry

Number:

Mnemonic
Name:
Call
Parameters:
From the Configure menu, select Configure FRI
10
Stations. Then configure the following.
Prompt
Port Number:
Station
Number:
Station Type:
Link
Address:
No. of PVC
Chan:
No. of SVC
Chan:
Enter Result/Description
1 References this
table record.
SDLC1001 Identifies the
mnemonic name
1000201 Identifies the
location to send the
autocall. The
convention is to
identify the node
and port number in
this parameter
Enter Result/Description
1 Identifies port
number 1 of this
node.
1 Identifies the
station being
configured.
ANNEX_G Adds a packet
header and LAPB
header to frame for
reliability checking
between Frame
Relay stations.
DTE Specifies the type
of link address
0 Specifies the
number of channels
used for Permanent
Virtual Circuits.
16 Specifies the
number of logical
SVC channels on
this port.
The Mnemonic
table appears.
The FRI Stations
table appears.