Table Of Contents - Motorola 68230 - Vanguard 300 DSU/CSU Operator's Manual

From the Configure menu, select Configure LAN
2
Connection -> LAN Connection Table. Then
configure the following.
Prompt
Entry
Number:
LAN
Forwarder
Type:
Router
Interface
Number:
Encapsulation
Type:
From the Configure menu, select Configure Network
3
Service -> PVC Table. Then configure the following.
Prompt
Entry
Number:
Source:
#1
Destination:
From the Configure menu, select Configure Router -
4
> Configure Interface States. Then configure the
following.
Prompt
Interface #1
State:
Interface #5
State:
Enter Result/Description
1 References this
table record.
ROUT Specifies that the
LAN connection is
to pass routed
traffic.
5 Identifies the router
interface number
being configured.
RFC1294 Specifies the type
of encapsulation
used for this LAN.
Enter Result/Description
1 Identifies the PVC
Table entry being
configured.
FRI-1S2 Specifies the PVC
source.
LCON-1 Identifies the PVC
destination.
Enter Result/Description
Enabled Enables the router
interface.
Enabled Enables the router
interface.
The LAN
Connection Table
appears.
The PVC Table
appears.
The Configure
Interfaces record
appears.