Motorola 68230 - Vanguard 300 DSU/CSU Operator's Manual page 51

From the Configure IP menu, select Interfaces. Then:
3
Configure the following.
Prompt:
Entry Number:
Interface
Number:
IP Address:
Entry Number:
Interface
Number:
IP Address:
From the Configure menu, select Port record. Then:
4
Configure the following.
Prompt:
Port Number:
Port Type:
Clock Source:
Link Address:
Port Number:
Port Type:
(Select TR on
the 305, and
ETH on the
300)
Enter: Result/Description
1 References this table
record.
1 Identifies the router
interface number being
configured.
219.3.83.23 Identifies the IP
0 address associated with
this interface.
2 References this table
record.
5 Identifies the router
interface number being
configured.
200.1.1.230 Identifies the IP
address associated with
this interface.
Enter: Result/Description
1 Identifies port number
1 of this node.
X25 Identifies an X.25
interface port.
Ext Identifies that the clock
will not be generated
by this port.
DTE Defines the logical
address of the port for
X.25 operation.
5 Identifies port number
5 of node 300.
ETH Identifies an Ethernet
interface port.
TR Identifies a Token Ring
interface port.
The Interfaces
menu appears.
The Port record
appears.