Table of Contents
Advertisement
Configuring a Vanguard Router
T0100-01, Revision B
On Demand
Range:
ENABLED/DISABLED if Encapsulation Type = CODEX
Default:
DISABLED if Encapsulation Type = CODEX.
On when Encapsulation Type = RFC 877.
Description:
Specifies whether a circuit is established at system startup, or upon
receiving data to pass. On Demand SVCs can support IP, IPX, and
Asynchronous traffic over X.25 by becoming active when there is
data to send and deactivating once all data has been sent.
Guidelines:
Appears only with:
• LAN Forwarder Type = ROUT and,
• Autocall mnemonic is entered.
Boot Type:
Changes to this parameter require a Table and Node Record boot.
*Idle Timeout
Range:
0 to 65535 seconds
Default:
90 seconds
Description:
Specifies the amount of time in seconds the SVC remains
connected without passing data before the SVC is deactivated.
Any positive value deactivates the On Demand SVC as stated
earlier in this document.
A zero Idle Timer entry allows the SVC to come up as On
Demand, but when there is no more data to send, the link remains
active and functions as a Permanent SVC.
Boot Type:
Changes to this parameter require a Node boot.
Guidelines:
Appears only with:
• LAN Forwarder Type configured as ROUT and,
• RFC 877, or CODEX configured with On Demand
ENABLED and,
• Autocall mnemonic entered.
Broadcast
Range:
ENABLE, DISABLE
Default:
Enabled
Description:
Specifies whether broadcast datagrams are transmitted over this
LAN Connection to the remote destination.
Guidelines:
Appears only if the LAN Connection Type is configured as
GROUP.
Configure LAN Connections
Release 5.4
3-23
Hide quick links:
Advertisement
Table of Contents
