Motorola 110502USM001 - Vanguard 60 Router User Manual page 68

Configure LAN Connections
3-18
*Router Interface Number
Range: 5 to n, where n = 36 to 254
Default: 5
Description: Specifies a Router Interface using this LAN Connection record.
This connection makes it possible to pass LAN data through the
WAN network to a remote Vanguard router. The allowable range
of values reflects the maximum number of IP or IPX interfaces set
in the IP or IPX Parameters Menu.
Guidelines: Appears if the LAN Forwarder Type is configured as ROUT or
BROUT
Boot Type: Changes to this parameter require a Node Boot to take effect.
Encapsulation Type
Range: • CODEX, RFC 877, RFC 1294
(if LAN Forwarder Type = ROUT)
• CODEX (if LAN Forwarder Type = BRID)
• CODEX (if LAN Forwarder Type = BROUT)
Default: CODEX
Description: Specifies the type of encapsulation used over this LAN
connection. Encapsulation types supported include:
• CODEX: Codex Proprietary Encapsulation
• RFC 877/1356: RFC 877/1356 X.25 protocol encapsulation
for IP
• RFC 1294/1490: RFC 1294/1490 multiprotocol encapsulation
over Frame Relay
Guidelines: Codex Proprietary encapsulation is required when
LAN Forwarder Type = BRID or BROUT.
Boot Type: Changes to this parameter require a Table and Node Record boot
to take effect.
Configuring a Vanguard Router