Motorola 110502USM001 - Vanguard 60 Router User Manual page 53

Bridging
Apple Talk
OSPF
SoTCP
Slim IP
Configuring a Vanguard Router
T0100-01, Revision B
Configure these additional parameters or table records for bridging operation:
• Bridge Parameter
• Bridge Link Parameter
Other Bridge parameters are optional.
Note
Remember to set the "LAN Forwarder Type" parameter to BRID or BROUT.
This parameter is configurable under
Configure these additional parameters or table records to support Apple Talk routing
over the Ethernet LAN:
• Apple Talk Parameter
• Zone Seed Table
• Apple Talk Interface
Note
Apple Talk can only be configured for point-to-point LCON (WANView). Set
the "LAN Connection Type" parameter to "Pt-to-Pt." this parameter is
configurable under
Configure -> Configure LAN Connection Table
Configure these additional parameters or table records to support OSPF routing:
• IP Interface
• IP Parameters
• OSPF Routing Parameters
• OSPF Interface
• OSPF Area Parameter
Configure these additional parameters or table records to support SoTCP:
• IP Interface
• SoTCP Map Table
• SoTCP Parameters
Note
When configuring the Route Selection Table, specify SOTCP as the destination
to which calls are routed.
Configure these additional parameters or table records to support Slim IP on the
Vanguard 6560, 6520, 200 and 100:
• SIP record
• SNMP Agent Configuration record
Configure -> LAN Connection Table
Configuration
.
.
3-3
Release 5.4