Motorola 110502USM001 - Vanguard 60 Router User Manual page 77

Configuring a Vanguard Router
T0100-01, Revision B
Compression Type
Default RTP
Range RTP, UDP, RTP+UDP
Description Specifies the compression type:
• RTP - This option compresses RTP/UPD/IP packet headers
only. The Vanguard only tries to compress packets with even
number UDP ports and UDP header packet size greater than
12 bytes.
• UDP - This option compresses UDP/IP header compression
only. This allows voice header packet compression. However,
the RTP header of the RTP/UDP/IP stream is not compressed.
• RTP+UDP - This option allows both RTP/UDP/IP and
UDP/IP header compression. If this is configured, all packets
are compressed.
Note
Changes to this parameter causes the context list to be refreshed.
UDP Port Ranges
Default 1025-65535
Range 1025 to 65535
Description Specifies a range of UDP ports. Header compression applies to
packets received or transmitted on this range of UDP ports.
Specify the parameter as individual ports or a range of ports; for
example 1025-6500, 6567, 7600-7650.
A maximum of eight port ranges can be specified.
Maximum Packet Size
Default 0
Range 0 to 2048
Description Specifies the maximum size of the packet to be compressed.
Packets with size exceeding this value are not compressed.
If this parameter is set to 0, then maximum packet size is ignored.
Configure LAN Connections
Release 5.4
3-27