Lan Connection Group Statistics - Motorola 110502USM001 - Vanguard 60 Router User Manual

Using LAN Connection Statistics

LAN Connection Group Statistics

Function
What You See In
This Screen
4-12
When you select LAN Connection Group Statistics, the Vanguard CTP menu
prompts for:
• A Router Interface number corresponding to the LAN Connection Group
• Which Group to display, if multiple Groups exist on this Router Interface.
This is based on IP/IPX Network Addresses configured for the interface.
Once you provide this information, a statistics screen appears displaying a single line
for each next hop destination in the LAN Connection Group.
Figure 4-8 shows an example LAN Connection Group Statistics screen.
Node:
LAN Connection Group Statistics
This LAN Connection Group is tied to Router Interface #5
There is 1 LAN Connection in this group
Next Hop
LAN Connection IP Address
================= ================ =============== ================ =======
1 Connected 134.33.200.4
Press any key to continue ( ESC to exit ) ...
Figure 4-8. LAN Connection Group Statistics Screen Example
Address: Date:
Next Hop
IPX Node Number
15
Time:
Page: 1 of 1
Remote Parallel
Destination SVCs
80094 0/0
LAN Connection Statistics