Motorola 110502USM001 - Vanguard 60 Router User Manual page 67

Configuring a Vanguard Router
T0100-01, Revision B
*Bridge Link Number
Range: 5 to n, where n = 36 to 250
Default: 5
Description: Specifies the Bridge link using this LAN Connection record. This
connection makes it possible to pass LAN data through the WAN
network to a remote Vanguard bridge. The allowable range of
values reflects the maximum number of bridge links set in the
Bridge Parameters Menu.
For more information, refer to the Bridging Manual
(Part Number T0100-04).
Guidelines: Appears only with the LAN Forwarder Type = BRID or BROUT.
Boot Type: Changes to this parameter require a Table and Node Record boot.
LAN Connection Type
Range: PT_to_PT, GROUP
Default: PT_to_PT (Point-to-Point)
Description: Specifies whether this LAN Connection defines a point-to-point
connection across the WAN, or is part of a group of LAN
Connections. If configured as GROUP, multiple LAN Connections
can use the same Router Interface number. If configured as
PT_to_PT, the Router Interface configured must be unique to this
LAN Connection.
Guidelines: Appears only if the LAN Forwarder type is configured as ROUT
or BROUT.
Boot Type: When changing from GROUP to PT_PT, a Node boot is required.
Otherwise, a Table and Node Record boot is required.
Configure LAN Connections
Release 5.4
3-17