Table of Contents
Advertisement
Configure LAN Connections
3-24
LCON Queue Limit
Range:
0 to 65536
Default:
16000
Description:
The LCON Queue Limit parameter specifies the maximum
number of bytes that are queued for this LAN before transmission
on the WAN link. Set this parameter for two seconds of data on the
WAN link.
Billing Records
Range:
OFF, ON
Default:
OFF
Description:
Enables or disables the creation (storing and printing) of billing
records for the LAN connection:
• ON: Billing records are generated.
• OFF: Billing records are not generated.
Traffic Priority
Range:
LOW, MED, HIGH, EXP, LOW-AND-PROTOCOL, MED-AND-
PROTOCOL, HIGH-AND-PROTOCOL, EXP-AND-
PROTOCOL
Default:
HIGH
Description:
Specifies the Traffic Priority level of this LAN Connection and
also enables Protocol Priority depending on the option configured.
• LOW: One Low Priority packet is sent for every Traffic
Priority Step number of Medium priority packets.
• MED: One Medium priority packet is sent for every Traffic
Priority Step number of High priority packets.
• HIGH: High is the first level of priority packets sent, if no
expedite priority packets are sent.
• EXP: Expedite priority packets have the highest priority and
use all of the link bandwidth that they need. Any remaining
bandwidth is shared by the high, medium, and low priority
packets.
• LOW-AND-PROTOCOL - Low Priority with Protocol
Priority enabled.
• MED-AND-PROTOCOL - Medium Priority with Protocol
Priority enabled.
• HIGH-AND-PROTOCOL - High Priority with Protocol
Priority enabled.
• EXPEDITE-AND-PROTOCOL - Expedite Priority with
Protocol Priority enabled.
Configuring a Vanguard Router
Hide quick links:
Advertisement
Table of Contents
