Ssh Client Support; Entering Strings; Context Hierarchy - HP MSM3xx Reference Manual

SSH client support

The following SSH clients have been tested with the CLI. Others may work as well:
„ OpenSSH
Tectia
„
„ SecureCRT
„ Putty

Entering strings

When entering a value that contains spaces, you must enclose it in quotation marks. For
example, if the command syntax is:
ssid <name>
you must specify one of the following:
ssid ANameWithNoSpaces
ssid "A name with spaces"

Context hierarchy

CLI commands are grouped into functional contexts. The following table shows the context
hierarchy and the command used to switch from the parent context.

Context hierarchy

View context
Enable context
Config context
WAN IP interface context
Port-2 interface context
VLAN interface context
Port-1 interface context
VLAN interface context
Wireless context
Local mesh context
VLAN interface context
GRE interface context
Virtual AP context
Syslog destination context
SNMP user context
SNMP notification receiver context
RADIUS context
IP_QOS context
Command to switch from parent context
(This is the first context. No command is needed.)
enable
config
interface ip
interface ethernet port-2
interface vlan <id>[-<id2>]
interface ethernet port-1
interface vlan <id>[-<id2>]
interface wireless <number>
local mesh profile <name>
interface vlan <number>
interface gre <name>
virtual ap <name>
logging destination <name>
snmp-server user <name>
snmp-server notification receiver <host>
radius-server profile <name>
ip-qos profile <name>
Introduction

Entering strings

1-7