About This Guide; Products Covered; Hp Procurve Product Naming - HP MSM3xx Reference Manual

Introduction

About this guide

About this guide

This guide explains how to work with the Command Line Interface (CLI) on HP ProCurve
Networking MSM3xx and MSM4xx APs.

Products covered

This guide covers the following products:
Model
MSM310 Access Point
MSM310-R Access Point
MSM320 Access Point
MSM320-R Access Point
MSM325 Access Point with Sensor
MSM335 Access Point with Sensor
MSM410 Access Point
MSM422 Access Point

HP ProCurve Product Naming

As of October 1st, 2008, Colubris Networks was acquired by HP ProCurve. HP ProCurve has
begun integrating the Colubris product line into the HP ProCurve Networking product
portfolio (www.procurve.com/news/colubris-10-01-08.htm).
In the online help and this manual, Colubris product names have been changed to their
equivalent HP ProCurve product names.
Note
SOAP and SNMP MIBs retain the Colubris naming so you do not need to change your existing
SOAP and MIB usage.
The Colubris Networks product names and their corresponding new HP ProCurve product
names are as follows:
Colubris name
MSC-5100 MultiService Controller
MSC-5200 MultiService Controller
MSC-5500 MultiService Controller
1-2
Part number
USA Worldwide
version version
J9374A J9379A
J9380A J9383A
J9360A J9364A
J9365A J9368A
J9369A J9373A
J9356A J9357A
J9426A J9427A
J9358A J9359A
HP ProCurve name
MSM710 Controller
MSM730 Controller
MSM750 Controller