Ups Meters Display; Ups Configurations - Toshiba 1000 SERIES User Manual

7.5

UPS Meters Display

Listed below are the parameters available for viewing from the UPS meters display.
Press this button to scroll through the parameters.
LCD Message
O/P VOLT= xxx.xV
O/P FREQ= xx.x Hz
I/P VOL T= xxx.xV
I/P FREQ= xx.x Hz
BAT VOLT= xx.xV
O/P LOAD%= xx%
O/P W= xW
O/P VA= xVA
O/P CURR= xA
BACKUP TIME= xx min Shows Estimated Backup Time in Minutes
BAT CHARG= xx%
TEMPERATURE= xxC
BAT PACK NUM= x
RATING = xxxxVA
CPU VERSION xx.x
7.6

UPS Configurations

1) Parameter settings may be viewed from the UPS Settings display.
2) To enter the configuration mode, press and hold the Function button for one second.
The first configuration parameter will be shown on the LCD display.
3) Press the Function button again to scroll through the remaining parameters.
Shows Output AC Voltage
Shows Output Frequency
Shows Input AC Voltage
Shows Input Frequency
Shows Battery Voltage
Shows Load % of Max Load
Shows Output Watts
Shows Output VA
Shows Output Current
Shows Approximate Percentage of Battery Capacity
Shows Approximate Ambient Temperature
Shows External Battery Pack Number
Shows UPS Rating
Shows CPU Version
24
Description