Cleaning The Wand; Accessories And Options - Hand Held Products Quick Check Bar Code Verifiers 800 User Manual

Bar code verifiers
Table of Contents

Advertisement

2. Hold the mouse wand as you would a computer mouse, placing your fingers
on each side of the mouse near the front.
3. Lightly pass the mouse wand over either quiet zone (clear area) of the bar
code. If the unit does not respond, press POWER.
4. At about the same speed with which you would quickly underline a sentence
in this manual, and without interruption, gently pass the mouse wand across
the center of the bar code. You do not need to press the mouse on the bar
code.
5. Listen for audible tones.
If you hear a long beep tone followed by a short tone, it signifies a good
read.
If you hear a long beep and then three short beeps, the unit detects an
error in the scanned symbol.
If one of these messages appears,
please!;
technique accordingly. If a symbol consistently produces no beeping,
it is either fatally out of spec or it is not one of the symbologies
programmed on the unit.
If you receive a message about a bad quiet zone, you may have
started scanning too close to the first bar. Rescan the symbol, starting
a little farther away from the first bar.
6. Practice your scanning technique until you can successfully scan, on the first
attempt, each of the test symbols supplied with the verifier.

Cleaning the Wand

Occasionally the scanner tip or window may become partially obstructed by ink,
paper fibers, or other particulate deposits (such as wax or varnish). To ensure
reliable scanning, you should periodically check and, if necessary, clean the tip
with a soft cloth.
Note: Damaged tips for the pen wand should be replaced. Consult your dealer
or Hand Held Products' Customer Service Department for details.

Accessories and Options

Hand Held Products supplies a variety of accessories and options for the Quick
Check 600/800 Verifier. The items indicated by an asterisk are supplied with the
verifier.
Item/DescriptionOrder code
Charger & Batteries
*Quick Check 600/800 Verifier AC Charger . . . . . . . . . QCAC = 110 VAC
*NiCad Rechargeable batteries (set of four "AA" size) . . . . . . . . . . QCB
1 - 14
or
more evenly, please!
Quick Check® 600/800 Series User's Guide
slowly, please!
; adjust your scan
QCAC 220B = 220 VAC UK
QCAC 220A = 220 VAC Europe
;
faster,

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents