Table of Contents
Advertisement
The Installer Programmable Features
Installer Programmable Features should only be used by the original
or other qualified installer, AND individual Installer Features should
only be used, where applicable, with the correct wiring connections.
The second group of 10 features, the Installer Programmable Features,
are accessed as the second level of features' programming, which is
pressing the Valet Switch 10 times instead of 5 times when entering
Programming Mode (page 27). Caution: These features have a critical
affect upon the system's operations, and in many cases, also upon the
system's wiring connections.
changed, except by the installer or other qualified professional. The
companion Installation Instructions booklet should be consulted for wiring
connections associated with these features.
1
Doorlocking Functions
2
Light Relay Functions
3
Horn Relay Functions
4
Turbo Timer
5
Manual Transmission Remote Starting
6
"Tach Wire" or "Tachless" Starter Operations
7
Extended Starter Cranking Time
8
Programmable Remote Start Relay
9
Arm, Disarm or Additional Channels
10
Gasoline or Diesel Engine
Use the step-by-step instructions on pages 27-28, but press the Valet
Switch 10 times at Step 3, to change any of the Installer Programmable
Features. The feature's option choices and related programming transmitter
button assignment found in the following individual feature descriptions.
Feature #1 Doorlocking Functions
Factory Default Setting
.8 Second Lock & Unlock Output
(press "arm/lock" button to program)
Options:
3 Second Lock & Unlock Output
Double Pulse Unlock Output
Total Closure Lock Output
This single feature gives the installer several needed options, to match the
AL-1610-EDP's doorlocking outputs to suite different vehicle require-
ments.
These features should NEVER be
(press "disarm/unlock" button to program)
(press "||" button to program)
(press red "|||" button to program)
Page - 38
"
"
||
•
Pressing the "
" button for two seconds can be used to activate
||
an extra output, known as the "2nd channel", for an optional function
such as trunk release.
•
Pressing and releasing this button twice arms or disarms the system
without the confirmation chirps.
•
Pressing this button immediately after arming will leave the alarm
armed, but with the shock sensor feature bypassed.
Red "|||" button
•
Pressing and holding the "|||" button for 3 seconds will activate the
remote Panic feature, but without locking or unlocking the doors.
•
The "|||" button can be reprogrammed so that it can operate an
additional 3rd channel output, instead of operating Panic.
•
Pressing the "
" and "
" buttons together operates the 3rd
||
|||
channel output.
- IMPORTANT -
The AL-1610-EDP is the most versatile vehicle security system
made. It has many programmable features and includes built-in
programmable relays, which can offer more features and opera-
tions which are described in the basic system instructions.
To a large degree, these extra features and operations are config-
ured at the installation of the system. Please read the sections of
this manual which explain programmable features, and please
consult your installer for specifics on how your system is config-
ured, and for installation options which may have used, or can be
added to system after installation.
EXAMPLE- the AL-1610-EDP can sound the vehicle's horn in place of
or in addition to the electronic siren which is included with it. But
the operations are described with the siren only.
Page - 7
Hide quick links:
Advertisement
Table of Contents
