Table of Contents
Advertisement
S
PECIFICATIONS
ITEM
Model No.
Print method
Print head
Print direction
Print speed
High Speed Draft (HSD)
Letter Quality (LQ)
Utility
Line Feed (LF) time
Form Feed (FF) speed
Paper feed control
Duplication capability
Feeding direction
Feeding mode
Continuous forms tape tail detection
method
Character sets
Cut-sheet paper
Paper width
Paper length
Single-part Weight
Number of copies
Thickness
SPECIFICATION
D22501B
Impact dot matrix
24 pins, 0.2 mm (0.0079 in) diameter
Bi-directional, Unidirectional, short-line-seeking
printing
333cps @ 10 cpi
83cps @ 10 cpi
250cps @ 10 cpi
Approximately 65 ms per line for LF of 4.23 mm (1/6
in)
Approximately 114.3 mm/s (4.5 in/s)
Paper feed: yes
Vertical tab: yes
Direct line feed: yes
Continuous forms: the original page +4 more pages
(total maximum paper thickness less than 0.325mm)
Cut sheet: the original page +4 more pages (total
maximum paper thickness less than 0.325mm)
Feed forward
Feed backward
Friction feed mode (front)
Pin tractor feed mode (rear)
Detected when remaining paper is approximately
14.8mm long. It can, however, print till about 6.35 mm
from the paper bottom (measured at the centre of the
characters).
(The print accuracy of the last page cannot be
guaranteed.)
Standard ASCII
Epson (Italics/Graphics)
IBM (Set1/Set2)
Windows Code Page
90 to 257mm (3.54 to 10.12in)
70 to 364 mm (2.76 to 14.33 in)
52 to 156gsm
Original plus 4copies
0.325mm (0.012in) maximum
Specifications > 49
Advertisement
Table of Contents
