Table of Contents
Advertisement
s
PecificatioNs
ml1120
IteM
Product Name
Model No.
Print method
Print head
Print direction
Print speed
High Speed Draft (HSD)
Near Letter Quality (NLQ)
Utility
Line Feed (LF) time
Form Feed (FF) speed
Paper feed control
Duplication capability
Feeding direction
Feeding mode
Continuous forms tape tail
detection method
Character sets
Media
ML1120/ML1190 User's Guide - Consumables and accessories > 83
sPeCIFICAtIon
ML1120
D22400B
Impact dot matrix
9 pins, 0.3 mm (0.0118 in) diameter
Bi-directional, short-line-seeking printing
333 cps @ 10 cpi
62.5 cps @ 10 cpi
250 cps @ 10 cpi
Approximately 52 ms per line for LF of 4.23 mm (1/6
in)
Approximately 101.6 mm/s (4.0 in/s)
Paper feed: yes
Vertical tab: yes
Direct line feed: yes
Continuous forms: the original page +4 more pages
(total maximum paper thickness less than 0.325 mm)
Cut sheet: the original page +4 more pages (total
maximum paper thickness less than 0.325 mm)
Feed forward
Feed backward
Friction feed mode (top)
Pin tractor feed mode (rear)
Detected when remaining paper is approximately 46
mm long. It can, however, print till about 6 mm from
the paper bottom (measured at the centre of the
characters).
(The print accuracy of the last page cannot be
guaranteed.)
Standard ASCII
Epson (Italics/Graphics)
IBM (Set1/Set2)
ML
Foreign
Code Page
See "Setting the Paper Thickness lever" on page 41.
Advertisement
Table of Contents
