Table of Contents
Advertisement
11.
Turn the knob (1) clockwise (in the direction of the arrow) to wind up the ribbon.
>
Do not turn the knob anticlockwise as the ribbon might jam.
>
Make sure that the ribbon is not twisted or damaged when it goes
through the gap between the Print Head and the ribbon guide.
12.
Hold (1) and lift the paper feed guide (2) and slide it along the rails in the direction
indicated by the arrows until it locks back into position.
13.
Close the printer Top Cover.
14.
Set the Paper Thickness lever to match the paper being used.
Paper Thickness lever" on page
15.
Set the printer Power Switch to ON.
C
ONSUMABLE ORDER INFORMATION
ITEM
Ribbon cartridge
(Black)
CAUTION!
1
22.)
LIFE
2 million characters
Consumables and accessories > 48
1
2
(See "Setting the
ORDER NO.
43821103
Advertisement
Table of Contents
