Oki ML5100FB User Manual page 31

ITEM
TOF (Continuous)
Initial Position
Auto Eject Position
Page Length (Cut Sheet)
TOF (Cut Sheet)
Wait Time
FF Function
*EPSON only
I-Prime
Auto Feed XT
*EPSON only
I/F Bi-Direction
FUNCTION
Select the reference position for
the TOF position when auto
loading continuous form paper
from the rear of the printer. (Up
to the mid-section of characters
in the first line.)
This is the position of the paper
when the paper is already
loaded at power on. (For
continuous form mode only.)
Select a printable area at the
bottom of cut sheets of paper in
cut-paper mode (the character
centre position).
Select the page length of cut-
paper.
Select the reference position for
the TOF position when feeding
cut-paper in manual mode. (Up
to the mid-section of characters
in the first line.)
Select the waiting time between
setting paper on the tray and
feeding it while the printer is
waiting for paper to be fed in
cut-paper manual feed mode.
Set feeding operation upon
receiving an FF code after cut-
paper is fed.
Select whether to print or clear
buffer contents upon
initialisation by receiving I-
PRIME.
Set the validity of an Auto Feed
XT signal.
Set whether to return a device
ID or not in accordance with
IEEE1284.
Operating instructions > 31
SETTING
2.12 mm (1/12 in)
4.23 mm (1/6 in)
6.35 mm (1/4 in)
8.47 mm (1/3 in)
10.58 mm (5/12 in)
12.7 mm (1/2 in)
14.82 mm (7/12 in)
16.93 mm (2/3 in)
19.05 mm (3/4 in)
21.17 mm (5/6 in)
23.28 mm (11/12 in)
25.4 mm (1 in)
27.52 mm (13/12 in)
1Chr. Set Pos.
Print
Tear OFF
6.35 mm (1/4 in)
14.8 mm
3.5 in, 4 in, 5.5 in, 6 in, 7 in, 8
in, 8.5 in, 11 in, 11 2/3 in, 12
in, 14 in, 16.57 in, 5 in, 3 in,
3.25 in
2.12 mm (1/12 in)
4.23 mm (1/6 in)
6.35 mm (1/4 in)
8.47 mm (1/3 in)
10.58 mm (5/12 in)
12.7 mm (1/2 in)
14.82 mm (7/12 in)
16.93 mm (2/3 in)
19.05 mm (3/4 in)
21.17 mm (5/6 in)
23.28 mm (11/12 in)
25.4 mm (1 in)
27.52 mm (13/12 in)
1Chr. Set Pos.
500 ms
1 sec
2 sec
Eject
Form Feed
Invalid
Buffer Clear
Buffer Print
Valid
Invalid
Enable
Disable