Printing From A Macintosh Computer; System Configuration; Target Computers; Set Up Procedure - Oki B6200 Series User Manual

7 Printing From a Macintosh
Computer
7.1

Printing From a Macintosh Computer

This section explains the installation procedure for printing from a Macintosh computer.

System Configuration

As the printer supports EtherTalk and LPD protocol, you can print from Macintosh.
Note
• Printing using the LPD protocol is available only with the Mac OS X.

Target Computers

The printer supports a Macintosh or Power Macintosh with the following OS:
• Mac OS 8.6 through 9.2.2
• Mac OS X
Refer to
• User Guide (PostScript Driver)

Set Up Procedure

The setting procedure is as follows:
1. Setting up the printer
Use the printer control panel or OkiWebRemote to set the following port to [Enable].
• Printing through LPD: LPD port (default: [Enable])
• Printing through EtherTalk: EtherTalk port (default: [Disable])
Note
• For details on how to set the port, refer to the Setup and Quick Reference Guide.
• OkiWebRemote allows more detailed settings.
2. Setting up the Macintosh
Install the printer driver(Adobe PS) for Macintosh. Install the screen font if necessary.
Refer to
• User Guide (PostScript Driver)
40
7 Printing From a Macintosh Computer