When Using Windows Nt 4.0/Windows 2000/Windows Xp/Windows Server - Oki B6200 Series User Manual

When Using Windows NT 4.0/Windows 2000/Windows XP/Windows
Server 2003
The Printer Is Not Printing
Cause
Incorrect IP address.
If LPD spool is set to
[Memory], the print data
sent by the user in a single
print instruction has
exceeded the upper limit
of the receiving capacity
set up by the printer
control panel of the printer.
An irrecoverable error has
occurred during printing.
The data format of the
print data to be processed
by the printer and that
sent by the computer are
different.
Unable to Obtain the Desired Print Results
Cause
The specified print
language and that of the
print data are different.
The printer driver for this
printer is not used. (The
printer driver of another
company is used)
Verification
Ask the network administrator to check that
the IP address is correct.
Check the upper limit of the receiving
capacity from the printer control panel and
compare it with the print data which was sent
in the single print instruction.
Check the error message on the printer
control panel.
-
Verification
Check the specified print language and that
of the print data.
Check that the printer driver which came with
this printer has been selected.
Action
Set up the correct IP address for the printer.
1. If a single file of print data has exceeded
the upper limit of the receiving capacity,
split the file into smaller ones to keep
them below the upper limit of the
receiving capacity.
2. If multiple files have exceeded the upper
limit of the receiving capacity, reduce the
number of files which can be sent at one
go.
Switch off the printer, then switch it on again.
Disable the output function of Ctrl-D.
Action
Specify the print language consistent with
that used in the print data.
Select the printer driver which came with this
printer. If it does not appear on the selection
list, install and select the printer driver.
If a printer driver from another maker is used,
the printer may not print properly.
10.1 Using TCP/IP
55