Examples Of Settings For Sunos 4.1.4 - Oki B6200 Series User Manual
Network print enviroment
Hide thumbs
Also See for B6200 Series:
- Maintenance manual (679 pages) ,
- Setup manual (66 pages) ,
- User manual (64 pages)
Table of Contents
Advertisement
PSBIN/PSB
PS%n
PCL
ESCP/ESC
HPGL/HPG
PLT%nH
LP
AUTO/ATO
*: When printing a PostScript or HP-GL file, you can register logical printers whose output style is preset
using OkiWebRemote.
Important
• If a printer name other than the above is specified at printing, the printer mode set in OkiWebRemote is
used.
• When setting print languages/modes from the same workstation to a single printer, it is recommended to
set one kind each. If two or more kinds of languages/modes are set, the workstation may display the
same job number for some queries (lpq).
• To print an ASCII-format PostScript file, specify PSASC for data processing with TBCP enabled.
• To print a binary-format PostScript file, specify PSBIN for data processing with TBCP disabled.
• When PS is specified, the printer operates as if PSBIN is specified (factory shipping).
Note
• Lowercase characters may be used for a printer name.
• When outputting the PostScript file, using the UNIX filter is recommended.
Examples of Settings for SunOS 4.1.4
The examples below show printer settings for SunOS 4.1.4 where the printer host name is
printer1.
1.
Registering a printer (printer name: P001) supporting the PostScript language
#
##chosen PS decomposer on printer
##
P001 | printerPS | Auto select PS:\
2.
Registering a printer (printer name: P002) supporting the Postscript language that
feeds paper from an A4-size paper tray for duplex printing
#
##chosen PS decomposer on printer
##
P002 | printerPS:\
Printer name
:lp=:rp=PS:rm=printer1:\
:sd=/usr/spool/P001lpd:\
:lf=/usr/adm/printer1-errs:mx#0
:lp=:rp=PS_A4:rm=printer1:\
:sd=/usr/spool/P002lpd:\
:lf=/usr/adm/printer1-errs:mx#0
Print language/mode
PostScript
PostScript (%n: Input the number of the logical printer (1 - 10) that is
registered on the OkiWebRemote*.)
PCL
ESC/P
HP-GL
HP-GL (%n: Input the number of the logical printer (1 - 10) that is
registered on the control panel or the OkiWebRemote*.)
Print mode set in OkiWebRemote
Auto discrimination mode
6.2 Setting Up the Workstation
27
Advertisement
Table of Contents
