Honeywell Series 2000 Manual page 17

Press Heat/Cool Setpoint to change between
heat and cool settings. Use increase
decrease key to adjust temperature settings.
Press Run Program again to cancel the Hold
and to return to the program.
Run
Program
Set Program
Run Occupied Unoccupied
Program Start Time Start Time Day
Temporary Set Current Clear
Occupied Day/Time Start Time Copy
Continous
Unoccupied
Changing Temperature Setpoint Until
Next Program Period
Press increase
desired temperature is displayed.
AM
Set Temperature Change
Time/Temp
Occupied Unoccupied
Temp Temp
Mon
Occupied 1
Heat/Cool
Settings
System
System Fan
Heat
or decrease key until the
NOTE: If
or
Room
Fan
Auto
M4954A
Press Run Program to cancel the temporary
setpoint and to return to the program.
Run
Program
17
or appear under the tempera-
ture display, it means that both the
heating and cooling setpoints are being
adjusted. Tapping the key will change
both the heat and cool setpoints by
one degree. Press Heat/Cool Settings
after the desired setpoint is reached to
review the settings.
Set Program Set Temperature Change
Time/Temp
Run Occupied Unoccupied Occupied Unoccupied
Program Start Time Start Time Day Temp Temp
Occupied
Temporary Set Current Clear Heat/Cool
Occupied Day/Time Start Time Copy Settings
Continous
Unoccupied System Fan
Set Program Set Temperature Change
Time/Temp
Run Occupied Unoccupied Occupied Unoccupied
Program Start Time Start Time Day Temp Temp
Mon
Temporary Set Current Clear Heat/Cool Occupied 1
Occupied Day/Time Start Time Copy Settings
System
Continous
Unoccupied System Fan
Heat
Temporary Setting
Heat
M4987B
AM
Room
Fan
Auto
M4954A
63-4356—1